Remote Start for Toyota PRIUS 2010-2015 "Push-To-Start" Models PLUS T-Harness

Description

DETAILED INSTRUCTIONS INCLUDED -
NO OTHER PARTS NEEDED
- MODULE COMES
"FLASHED"
FOR YOUR VEHICLE
All you need is a professional installer and about 25 minutes
for 2010 - 2015
Toyota PRIUS  "Push To Start" Models ONLY
Installs Quickly.
Part #: SGD2TOY2
Manufacturer: Directed Electronics (DEI)
Professional Installation Recommended
Remote Start Ready systems use your vehicles existing remotes.  Your vehicle starts by pressing the factory remote button 3 times.  Rather than taking a chance splicing and dicing the wires of your vehicles electrical system and adding multiple relays, bypass modules, control modules etc etc etc, the RSR system integrates into your vehicle's electrical system and uses your existing components to remote start  your vehicle.  It is a simpler, quicker, less expensive, more reliable means to remotely start your vehicle. Nevertheless, despite it's simplicity, this system should be installed by someone with a professional level of skill.
For "PUSH-TO-START" Models
ONLY
(with Smart Key)
WILL NOT WORK
if you do not have a PUSH-TO-START Model
OUR KIT INCLUDES
the vehicle specific
TOYOTA HARNESS
as shown..
Instead of slicing and dicing your vehicles wiring, and spending hours trying to sort out which wire is which, this harness keeps your installation clean and can shave hours off your installation time.  We don't want to mislead you - there
are
a few wires that you will still need to connect individually, but nowhere near the amount that would be necessary w/o this harness.
OUR KIT INCLUDES
a custom software
FLASH
immediately prior to shipment
, ensuring that you have the very latest in functionality and performance for your exact model & year
OUR KIT INCLUDES
the very latest
wire guides, instructions & tech tips
for your exact model & year
Simply press your factory remote button 3 Times to remotely start your vehicle!
Save TIME & MONEY on a quality Remote Start system for your Toyota.
Uses your existing remotes
. Integrates into your vehicle's electrical system without the need for separate alarm / remote start components.
It does require professional level skill to install
, but installs in about 1/4 the time !
MAKE SURE
YOUR VEHICLE IS A PUSH-TO-START 2010 - 2015 TOYOTA PRIUS BEFORE BUYING
Otherwise
, DO NOT BUY
this item
Integrates into factory electrical system & uses your existing 'keyless' remotes. INSTALLS IN ABOUT 1/4 THE TIME!
NOT COMPATIBLE w Vehicles w Manual Transmission OR Factory Remote Start System. Check the application guide for your vehicle in the DESCRIPTION section before buying.
If your vehicle uses a SMART KEY the engine will shut off when you open a door to enter the vehicle. To drive you must re-start w your key
Quick Install - Nevertheless,
this should be installed by an experienced professional
No additional purchase of an immobilizer bypass module is needed
.
*NOTICE
:  We repeat 5  times in this advertisement that this item should be installed by a professional, and preferable a Directed Electronics AUTHORIZED professional.  The installation of this device is simple, quick & clean, but there is always the potential that you may need to consult the manufacturer's technical department for assistance to complete your installation.  Manufacturer's assistance
may not be available
to non professionals.  Failure to install this item correctly or failure to obtain manufacturer's assistance to complete your installation does not constitute a defect.  Your module was tested in a simulation of your actual vehicle immediately prior to it's shipment to you.  There is a dated, initialed test certificate covering your module which verifies this.
IT IS NOT DEFECTIVE
, and this system DEFINITELY DOES WORK AS ADVERTISED IN THE VEHICLES SHOWN IN THIS AD.  Consequently, once you've opened this item, there is a 35% restocking fee if you are unable to complete your installation and you want to return this system for a refund.  Unopened items incur our normal, lower restocking fee.  If you suspect you have a defective item, we will be happy to re-test it at no charge and any true defects, rare as they may be, will be replaced for free.  If you consider yourself an adequately skilled DIY'r, there is about an 85% probability that you will be able to quickly and cleanly install this item like a professional, to your satisfaction.  However, if you fail, it will cost you 35%.  Please consider this
before
making your purchase
Listing and template services provided by inkFrog