CHADWICK Wireless Immobilizer relay, Simple install fits many vehicles like Kia

Description

US Stock. - Recommend confirming relay looks the same - it is 4 pin and 15mm x 21mm. Simply replace your fuel pump relay with this one and start using the remote. Can be set to automatically sense the remote when close so you can just leave on your keychain and operate like normal, or can be set to require manual input from remote prior to starting. Battery lasted over 2 months in test leaving in automatic mode. Just uses CR2032 battery in the remote.
Hanone CHADWICK Wireless Immobilizer Car Engine Lock Anti-hijacking Anti-theft Device Black Black
Brand: Hanone
1. Car engine anti-theft device.
2. Free installation of automatic induction replacement relay, invisible installation is not easy to identify.
3. No need to operate in automatic induction mode, you can switch between manual mode and anti-robbing mode.
4. No damage to the original car line, fast and convenient installation.
5. After it is turned off, it will automatically cut off the fuel, close to the vehicle and automatically open the oil path, the sensing distance is about 15 meters.
--
Technical Details
Brand
‎Hanone
Additional Information
ASIN
B09G2ZL4WL
--
Product description
A. begin the engine for the first time: the unit begin scanning the sensor ID password, which matches within 25 seconds, The car can be driven off successfully. If not successful, the fuel circuit will be cut off after 25 seconds, and the engine will stop.
B. begin the engine for the 2nd time: the unit shortens the scanning time to 20 seconds.
C. begin the engine for the 3rd time: the unit shortens the scanning time to 10 seconds.
D. begin the engine for the 4th time: Unit can not scan correct password that it was started illegally. No matter how many times it is started, the unit can sense the correct password before driving the car.
E. In the hidden-lock mode, the driving no longer scans the sensor ID, and the sensor needs to be sensed again after turning off.
F.In the anti-hijacking mode, the unit will begin normally after receiving the correct signal after starting the engine. If it does not receive the correct signal from the remote control within 1 minute, it will turn off. Receive signals while driving.
Description:
Anti-shielding and anti-interference technology, the chip is stable. Only suitable for 12V gasoline vehicles.
Specifications:
Type: A
Remote control: Static current is about 0mA, Working current is 5mA.
Battery specifications: CR2032
Unit-relay :working current is about 20mA,
load current : Model A 30A, Model B 40A, Model C 40A
Package Included:
1 * Unit-Relay
2 * induction remote control
1 * manual
Notes:
1. Please allow 0-1 inch error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from real object.