car alarm keyless entry system

Description

I am selling a generic Excalibur Keyless entry alarm system. This unit was made in the late 1990s early 2000s. They are NOS. and have the following features.
arm lock / disarm unlock function
pos. flashing light output 10 amp
pos / neg door triggers
trunk / hatch neg. trigger
trunk / hatch release output. (LOW VOLTAGE NEG output) (relay may be needed)
starter kill output. (relay required)
optional inputs for plug in 2 stage shock sensor
plug in led
plug in valet override
siren (included)
active or passive arm
active or passive locks
ignition lock / unlock
This is your basic alarm / keyless entry system. Description of wiring is on the back of the unit. (see picture). Operating instructions included.
If FULL PRICE IS PAID or 3 or MORE units are bought at an agreed price I will include the following. A 2 wire OR 5 wire door lock interface explained below and a starter interrupt relay and socket.
The best offer still applies for basic alarm. (pic's 1-5)
Starter interrupt (pic 8)
The DLP (pic 9) unit is a 2 wire unit that simply plugs into the door lock plug on the alarm in place of the standard wires and converts the LOW AMP negative pulse to a LOW AMP positive pulse. NOT USED FOR HIGH AMP LOCK SYSTEMS
The DLS  (pic's 6 &7) unit requires 2 relays and can be wired for most any type of door lock system that need a HIGH AMP setup. such as 2 wire + pos. or 2 wire -neg type doorlocks that require HIGH AMPERAGE. 5 wire +pos. or -neg type doorlocks. Adding your own doorlock motors to vehicles that do not have power doorlocks, vacuum assist type doorlocks ( some older benz, volvo, bmw.) etc etc. I will also include 2 RELAYS required for this unit. INCLUDES INSTRUCTIONS for various applications.